Hotel Mode - Ingenico IWL200 series User Manual

Terminal User Guide

Hotel Mode

When a large value transaction is expected (typically in Hotel or Rental
environments), a Pre-Authorisation can be made for the expected value,
to check the customer's card is valid and the customer has enough
credit available for the transaction.
If the expected value increases, then further Pre-Authorisations can be
made. The final amount is fully authorised and captured by using the
Completion function.
To perform a Hotel Mode transaction press the menu key three times,
then choose
 MENU, MENU, MENU, F1
F1
PREAUTH
A Pre-Authorisation (
transaction. If the customer's card number is keyed in, then you will be
asked to confirm if the customer is present. These transactions do not
include gratuities.
The transaction details are not captured by the acquirer, so the
customer's bank account IS NOT debited, although the available credit
on the customer's bank account will be reduced by the amount
authorised.
A Completion (
authorisation code and the total amount of all pre-auths, in addition to
the final amount to be debited from the customer's card. This
transaction will require a signature check and the acquirer will capture
the transaction details, so the customer's bank account is debited.
You must ensure that this option is enabled on your acquirers
Merchant Account. Contact your acquirer to ensure that this
option is available to you.
HOTEL by pressing the F1 key.
HOTEL MODE
COMPLTE
PREAUTH
Authorisation codes typically expire after 7 days (or 3-4 days for
Maestro cards). If the transaction is not submitted within that
time the customer's available balance will be restored by the
authorised amount.
COMPLTE
Choose the required transaction type:
Press F1 for
Press F4 for
F4
) transaction proceeds as for a Sale
) transaction requires the most recent
PREAUTH
; or
COMPLTE
.
Transactions
47