Ingenico IWL200 series User Manual page 17

Your Terminal
Eth & ETH
or
or
F1 F2
F3 F4
14
icon, even though no transaction is taking place.
GSM is a dial-up communication method and so the
legend will only be shown when the call has connected.
The LAN status icon indicates the current availability of the
network via an Ethernet cable or Wi-Fi.

White icon: not connected

Red icon: connected; communication not available
(issue obtaining IP address from DHCP server)

Green icon: connected; communication available
This symbol may show green even if your terminal is
communicating via a different method.
iWL22x models display the letters 'Eth' = connected and
IP obtained or 'ETH' = cable connected but no IP obtained
The signal icon indicates the status of either the Bluetooth,
the mobile network or the Wi-Fi signal as appropriate,
with red being the weakest signal and green being the
strongest. Your terminal may not be able to communicate
if the signal is very poor.
For Bluetooth terminals, the last eight digits of the serial
number from the paired based unit (i.e.
shown with the signal icon. The serial number for the base
can be found on the label on the underside of the unit. The
B
accompanying
it will show red if the base is not associated or is powered
off, whereas blue indicates the base is associated and is
powered on (you may additionally see a small
this case).
For mobile terminals, the mobile network name is shown
with the signal icon.
For Wi-Fi terminals, the wireless network name is shown
with the signal icon.
These labels indicate the option that can be selected by
pressing the corresponding function key. These are most
commonly seen on standard or choice menu screens.
icon shows the status of the base pairing;
Terminal User Guide
GSM
60234567
) are
icon in