Green/Enter Key; Yellow/Clear Key; Red/Cancel Key; Func Key - Ingenico iCT250 Operating Manual

SKYZER TECHNOLOGIES

2.4.2.1 Green/ENTER Key

The ENTER key is used to signal the end of a data entry sequence or a YES
response to a question.

2.4.2.2 Yellow/CLEAR Key

The CLEAR key is used to clear data that has been entered incorrectly or to
signal a NO response to a question.
This is also used to FEED the paper on the receipt printer by pressing and
holding down the CLEAR key.

2.4.2.3 Red/CANCEL Key

The CANCEL key is used to cancel the current action and return to the previous
display or in some instances to the main display.

2.4.2.4 FUNC Key

The FUNCTION key is used to enter the function menu.

2.4.2.5 MENU Key

The MENU key is used to access EFTPOS terminal menus.

2.4.2.6 'Soft' Function Keys

These are the four keys located just below the display screen. They are
controlled by the software and their function changes depending on the
prompts displayed on the bottom line of the display. The function of these keys
is displayed on the bottom line when they are available for use.

2.4.2.7 Alphanumeric Key Entry

The alphanumeric keys are grouped in the following way.
1 Q Z <space> ? –
q z
4 G H I
g h i
7 P R S
p r s
MENU
NITRO INGENICO ICT250 AND IWL252 2015 PAYMARK SOFTWARE OPERATING GUIDE
2 A B C
a b c
5 J K L
j k l
8 T U V
t u v
0 . , # * % $ &
@ ( ) / + = _
PAGE 24 OF 116
3 D E F
d e f
6 M N O
m n o
9 W X Y
w x y
FUNC
Version 1.0