Sim Card Installation - Ingenico IWL200 series User Manual

Terminal User Guide

SIM Card Installation

Mobile terminals require a SIM card in order to communicate. The SIM
card will be supplied already installed.
In order to access the SIM card you must first remove the SIM access
cover by unclipping the catches and lifting the cover as shown.
The SIM card should be inserted into the holder marked SIM. Take care
to ensure that the SIM card is inserted in the correct manner; the chip
should be facing downwards with the cut-out corner of the SIM card as
shown.
DO NOT use any tools when installing or removing your SIM
card. To avoid damage to the SIM card holder, ensure that when
installing the SIM card you do not apply undue pressure or
push the SIM card beyond the natural limits of the SIM card
holder.
Only use the SIM card supplied to you by your terminal
supplier; if your SIM card is lost, stolen, or damaged you should
contact the terminal Helpdesk immediately.
Your Terminal
Cut-out corner
17