Stored Report - Ingenico IWL200 series User Manual

Reports

Stored Report

A Stored Transaction report may be printed to show how many
transactions are stored in the terminal, awaiting transmission to the
host.
Up to five transactions may be stored in the terminal per acquirer. A
transaction may be stored after voice referral, or by using the Forced
Transaction or Hotel Mode Completion functions.
To perform a Stored report for ALL acquirers press the menu key twice,
then choose
your supervisor password, then press enter, press the menu key once
more, choose
ALL
choose
 MENU, MENU, F1, [password], ENTER, MENU, F1, F1
To perform a Stored report for a SINGLE acquirer press the menu key
twice, then choose
to type your supervisor password, then press enter, press the menu key
once more, choose
key to choose
required is displayed, select this by pressing enter.
 MENU, MENU, F1, [password], ENTER, MENU, F1, F4
76
Do not print this report unless instructed to do so by the
terminal Helpdesk.
REPORTS
by pressing the F1 key. You will be asked to type
STORED
by pressing the F1 key, followed by the F1 key to
.
REPORTS
STORED
SINGLE
. Press F4 repeatedly for
by pressing the F1 key. You will be asked
by pressing the F1 key, followed by the F4
Terminal User Guide
NEXT
until the acquirer