Ingenico IWL200 series User Manual page 84

Terminal User Guide
First Supervisor Menu Screen
HANDSET ID
PASSWORD
CONFIG
LOGON
Second Supervisor Menu Screen (press menu once)
SHORT CUT
TIPS
OP MODE
CALL TMS
HANDSET ID
Allows the
F1
screen and printed on each ticket to be set. The
default value is
Allows the various passwords in the terminal to be
F2
reset or changed. Enters the
next section.
Allows the access to various extended configuration
F3
options. Enters the
Allows the terminal to perform a test with some, or
all, of the acquirers loaded on the terminal. Do not
F4
use this feature unless instructed to do so by the
terminal Helpdesk.
Allows access to advanced configuration options.
F1
Enters the SHORT CUT
Allows the Gratuity/Tip mode to be switched on and
F2
TIPS
off. Setting
Allows the setting of when the terminal will contact
the acquirer for authorisation during the transaction.
F3
Gratuity/Tip mode is only available in
Setting OP MODE
Immediately sets off a configuration data call to the
Terminal Management System (TMS). Do not use
F4
this feature unless instructed to do so by the
terminal Helpdesk.
value displayed on the idle
01
.
PASSWORD
CONFIG menu - see next section.
menu - see next section.
ON OP MODE
to , sets
to EARLY , sets TIPS
Troubleshooting
menu - see
LATE
to .
LATE
mode.
to OFF .
81