Ingenico IWL200 series User Manual page 88

Terminal User Guide
To access the Shortcut menu press the menu key twice, then choose
SUPERVISOR
current supervisor password, and confirm this by pressing the enter key.
Press the menu key and choose
 MENU, MENU, F3, [password], ENTER, MENU, F1
Below is a summary of the functions within the Shortcut menu, how to
access them and what they do.
Shortcut Menu Screen
CONTACTLESS
PINPAD
EPOS INTERF
BLUETOOTH
Second Shortcut Menu Screen (press menu once)
WIFI SETUP
by pressing the F3 key. You will be asked to type your
Some Supervisor functions must only be used when instructed
to do so by the terminal Helpdesk.
Configures the internal/external Contactless Reader
F1
support. Do not use this feature unless instructed to
do so by the terminal Helpdesk.
Configures the external PINPad support. Do not use
F2
this feature unless instructed to do so by the
terminal Helpdesk.
Configures the EPoS (till) Interface functionality. Do
F3
not use this feature unless instructed to do so by the
terminal Helpdesk.
Allows the terminal to be associated to a Bluetooth
F4
base. Do not use this feature unless instructed to do
so by the terminal Helpdesk.
Configures the Wi-Fi network. Do not use this
F1
feature unless instructed to do so by the terminal
Helpdesk.
SHORT CUT
by pressing the F1 key.
Troubleshooting
85