Wifi Setup - Ingenico IWL200 series User Manual

Your Terminal
Wi-Fi Setup
Wi-Fi terminals must only be connected to a Wi-Fi network operating
with either WPA or WPA2 Wi-Fi security standards; you should contact
your IT provider if you wish to check or amend your Wi-Fi network's
configuration.
To enter the Wi-Fi configuration tool, press the menu key twice, and
then choose
type your current supervisor password, and confirm this by pressing the
enter key. Press the menu key, choose
key, press the menu key once more and choose
pressing the F1 key.
 MENU, MENU, F3, [password], ENTER, MENU, F1, MENU, F1
You can use the up, down and enter keys to select the desired option:
NEW PROFILE
ACTIVE PROFILE
MODIFY PROFILE
REMOVE PROFILE
Multiple Wi-Fi connection profiles (for different Wi-Fi networks) may be
saved in your terminal, allowing the most appropriate Wi-Fi network to
be used, at any given time, based on availability and the priority
weighting associated to each Wi-Fi connection profile.
18
PCI DSS (version 2) specifies that WEP must not be used for
securing Wi-Fi networks used by payment terminals. PCI DSS
compliance requires the use of robust encryption and
authentication as provided by the IEEE 802.11i standard (i.e.
WPA or WPA2).
SUPERVISOR
Create a new saved Wi-Fi connection profile.
Selects an existing saved Wi-Fi connection profile.
Edit an existing saved Wi-Fi connection profile.
Remove an existing saved Wi-Fi connection
profile.
by pressing the F3 key. You will be asked to
SHORT CUT
Terminal User Guide
by pressing the F1

WIFI SETUP

by