Initialization Mode Selection - Agilent Technologies 1260 User Manual

Initialization mode selection

The following initialization (init) modes are selectable:
Table 16 Initialization Mode Switches
Bootp
When the initialization mode Bootp is selected, the module tries to download
the parameters from a Bootp Server. The parameters obtained become the
active parameters immediately. They are not stored to the non-volatile
memory of the module. Therefore, the parameters are lost with the next power
cycle of the module.
Figure 15
Agilent 1260 Infinity DAD and MWD User Manual
SW 6 SW 7
OFF OFF
OFF OFF
OFF ON
OFF ON
Bootp (Principle)

Initialization mode selection

SW 8 Init Mode
OFF Bootp
ON Bootp & Store
OFF Using Stored
ON Using Default
LAN Configuration
61
4