Interfaces - Agilent Technologies 1260 User Manual

Table 1 Agilent 1200 Infinity Series Interfaces
Module
G4212A/B DAD
G1315C DAD VL+
G1365C MWD
G1315D DAD VL
G1365D MWD VL
G1321B FLD
G1362A RID
G4280A ELSD
Others
G1316A/C TCC
G1322A DEG
G1379B DEG
G4227A Flex Cube
G4240A CHIP CUBE
The detector (DAD/MWD/FLD/VWD/RID) is the preferred access point for control via
N O T E
LAN. The inter-module communication is done via CAN.
• CAN connectors as interface to other modules
• LAN connector as interface to the control software
• RS-232C as interface to a computer
• REMOTE connector as interface to other Agilent products
• Analog output connector(s) for signal output
Agilent 1260 Infinity DAD and MWD User Manual
CAN LAN/BCD LAN
(optional) (on-board)
2 No Yes
2 No Yes
2 Yes No
No No No
2 No No
No No No
No No No
2 No No
2 Yes No
RS-232 Analog APG
Remote
Yes 1 Yes
Yes 2 Yes
Yes 1 Yes
Yes Yes Yes
Yes No Yes
No No Yes
Yes No No
No No No
Yes No Yes
1
Introduction

Interfaces

Special
EXT Contact
AUTOZERO
AUX
AUX
CAN-DC- OUT for CAN
slaves
THERMOSTAT for
G1330A/B (NOT USED)
19