8
Error Information
Detector Error Messages
Detector Error Messages
These errors are detector specific.
Visible Lamp Current
The visible lamp current is missing.
The processor continually monitors the lamp current during operation. If the
current falls below the lower current limit, the error message is generated.
Probable cause
1
2
3
4
150
Lamp disconnected.
Defective visible lamp.
Defective connector or cable.
Defective power supply.
Suggested actions
Ensure the visible lamp connector is seated
firmly.
Exchange the visible lamp.
Please contact your Agilent service
representative.
Please contact your Agilent service
representative.
Agilent 1260 Infinity DAD and MWD User Manual