Remote Cables - Agilent Technologies 1260 User Manual

12
Identifying Cables

Remote Cables

Remote Cables
One end of these cables provides a Agilent Technologies APG (Analytical
Products Group) remote connector to be connected to Agilent modules. The
other end depends on the instrument to be connected to.
Agilent Module to 3396A Integrators
p/n 03394-60600
Agilent Module to 3396 Series II / 3395A Integrators
Use the cable Agilent module to 3396A Series I integrators (p/n 03394-60600)
and cut pin #5 on the integrator side. Otherwise the integrator prints START;
not ready.
258
Pin 3394 Pin Agilent
module
9 1 - White
NC 2 - Brown
3 3 - Gray
NC 4 - Blue
NC 5 - Pink
NC 6 - Yellow
5,14 7 - Red
1 8 - Green
NC 9 - Black
13, 15
Agilent 1260 Infinity DAD and MWD User Manual
Signal Name Active
(TTL)
Digital ground
Prepare run Low
Start Low
Shut down Low
Not connected
Power on High
Ready High
Stop Low
Start request Low
Not connected