Agilent Technologies 1260 User Manual page 69

11 Files load; when finished, the BootP Settings screen appears.
12 In the Default Settings part of the screen, if known, you can enter the subnet
13 On the BootP Settings screen, click OK. The Agilent BootP Service Setup screen
14 Click Finish to exit the Agilent BootP Service Setup screen.
15 Remove the DVD from the drive.
16 Start the BootP service. On the Windows® desktop, select Start > Control
Agilent 1260 Infinity DAD and MWD User Manual
Figure 19 BootP Settings screen
mask and gateway.
Defaults can be used:
• The default subnet mask is 255.255.255.0.
• The default gateway is 10.1.1.101.
indicates completion.
This completes installation.
Panel > Services. Select the Agilent BootP Service and click Start.
LAN Configuration
Automatic Configuration with BootP
4
69