Two Stack Configuration - Agilent Technologies 1260 User Manual

3
Installing the Module
Optimizing the Stack Configuration

Two Stack Configuration

To avoid excessive height of the stack when the autosampler thermostat is
added to the system it is recommended to form two stacks. Some users prefer
the lower height of this arrangement even without the autosampler
thermostat. A slightly longer capillary is required between the pump and
autosampler. (See
Figure 8
48
Figure 8 on page 48 and
Recommended Two Stack Configuration for 1260 (Front View)
Figure 9 on page 49).
Agilent 1260 Infinity DAD and MWD User Manual