Spectrum Settings (Dad Only) - Agilent Technologies 1260 User Manual

5
Using the Detector
Special Settings of the Detector

Spectrum Settings (DAD only)

To change the Spectra settings open.
1 To change the Spectra settings select Setup Detector Signals.
2 In the section Spectrum click on the drop-down list and chose a parameter.
3 Change the Range, Step width and Threshold according to your needs.
108
Table 25 on page 109 shows the possible parameters.
Figure 46 Spectra Settings
Agilent 1260 Infinity DAD and MWD User Manual