Special Settings Of The Detector; Control Settings - Agilent Technologies 1260 User Manual

5
Using the Detector

Special Settings of the Detector

Special Settings of the Detector

In this chapter special settings of the G1315C/D and G1365C/D are described
(based on the Agilent ChemStation B.02.01).

Control Settings

Figure 42 Detector control settings
100
• Lamps: turn on and off of UV- and Vis lamp
• At Power On: automatic lamp-on at power on.
• Error Method: take error method or current method (in
case of an error)
• Analog Output Range: can be set to either 100 mV or 1
V full scale, "Analog Output Settings"
• Automatic Turn On: lamps can be programmed
(detector must be on for this).
• Help: online help.
Agilent 1260 Infinity DAD and MWD User Manual
on page 107