Special Settings of the Detector
In this chapter special settings of the detector are described.
Control Settings
Figure 27
Detector control settings
Agilent 1200 Infinity Series VWD - User Manual
Special Settings of the Detector
• Lamp: turn on and off of UV-lamp.
• At Power On: automatic lamp-on at power on.
• Error Method: take error method or current method (in
case of an error).
• Analog Output Range: can be set to either 100 mV or
1 V full scale, see
"Analog Output Settings"
page 75.
• Automatic Turn On: lamps can be programmed
(detector must be on for this).
• Help: online help.
Using the Detector
on
71
4