Table of Contents
Advertisement
Leak Detector
Swapping or replacing the cartridge with ADM Flow Meter cartridge
32
Agilent CrossLab CS Electronic Leak Detector Operation Manual
Swapping or replacing the cartridge
with ADM Flow Meter cartridge
1
Press and hold the Power/Mode button for three seconds
to power down the unit.
2
Loosen both captive thumbscrews completely and lift the
cartridge out of the CrossLab CS Mainframe body.
3
Insert cartridge of ADM Flow Meter in to the CrossLab CS
Mainframe body. Hand tighten the two captive thumbscrews.
Captive screws
Advertisement
Table of Contents
