UPC-E0 Expand
UPC-E Expand expands the UPC-E code to the 12 digit, UPC-A format.
Default = Off.
UPC-E0 Number System
The numeric system digit of a UPC-A symbol is normally transmitted at the begin-
ning of scanned data. When using UPC-E Expand, the unit can be programmed so
it will not transmit it. Default = On.
UPC-E0 Number System and Check Digit
UPC-E0 Check Digit
Check Digit specifies whether the check digit should be transmitted at the end of
the scanned data or not. Default = Off.
Voyager 1250g User Guide
On
* On
UPC-E0 sample showing the number system and
check digit:
Number
System
* On
Check
Digit
* Off
Off
121