Upc-A Check Digit; Upc-A Addenda; Upc-A Addenda Required - Honeywell Voyager 1250g User Manual

UPC-A Check Digit

This selection allows you to specify whether or not the check digit should be trans-
mitted at the end of the scanned data. Default = On.

UPC-A Addenda

This selection adds 2 or 5 digits to the end of all scanned UPC-A data.
Default = Off for both 2 Digit and 5 Digit Addenda.

UPC-A Addenda Required

When Required is scanned, the scanner will only read UPC-A bar codes that have
addenda. You must then turn on a 2 or 5 digit addenda listed on
= Not Required.
116
* On
2 Digit Addenda On
5 Digit Addenda On
Required
Off
* 2 Digit Addenda Off
* 5 Digit Addenda Off
page 116. Default
* Not Required
Voyager 1250g User Guide