Straight 2 Of 5 Industrial Redundancy; Straight 2 Of 5 Industrial Message Length; Straight 2 Of 5 Iata (Two-Bar Start/Stop) - Honeywell Voyager 1250g User Manual

Straight 2 of 5 Industrial Redundancy

If you are encountering errors when reading Straight 2 of 5 Industrial bar codes,
you may want to adjust the redundancy count. Redundancy adjusts the number of
times a bar code is decoded before transmission, which may reduce the number of
errors. Note that the higher the redundancy count, the longer it will take to decode
the bar code. To adjust the redundancy, scan the Straight 2 of 5 Industrial Redun-
dancy bar code below, then scan a redundancy count between 0 and 10 on the
Programming Chart

Straight 2 of 5 Industrial Message Length

Scan the bar codes below to change the message length. Refer to
Description
= 1-80. Minimum Default = 3, Maximum Default = 80.
Minimum Message Length

Straight 2 of 5 IATA (two-bar start/stop)

Note: This symbology is also known as Airline Code 5.
Straight 2 of 5 IATA On/Off
100
on page 202. Then scan the
(page 88) for additional information. Minimum and Maximum lengths
<Default All Straight 2 of 5 IATA Settings>
On
Save
Straight 2 of 5 Industrial
Redundancy
bar code. Default = 0.
Message Length
Maximum Message Length
Voyager 1250g User Guide