Beeper - Transmit Order
The beeper transmit order determines when the good read beep occurs. The scan-
ner can be set to emit the good read beep either before or after data transmission.
Default = Before Transmission.
Beeper Pitch – Error
The beeper pitch codes modify the pitch (frequency) of the sound the scanner
emits when there is a bad read or error. Default = Razz.
Beeper Duration – Good Read
The beeper duration codes modify the length of the beep the scanner emits on a
good read. Default = Normal.
Voyager 1250g User Guide
High (4200 Hz)
Before Transmission
* Razz (100 Hz)
High (4200 Hz)
* Medium (2350 Hz)
After Transmission
Medium (2000 Hz)
43