Usb Pc Or Macintosh Keyboard; Usb Hid; Hid Fallback Mode - Honeywell Voyager 1250g User Manual

USB PC or Macintosh Keyboard

Scan one of the following codes to program the scanner for USB PC Keyboard or
USB Macintosh Keyboard. Scanning these codes also adds a CR and LF.

USB HID

Scan the following code to program the scanner for a USB HID bar code scanner.

HID Fallback Mode

If you attempt to set a USB interface for your scanner, but the setup fails on the
host system, you can program the scanner to fall back to a HID keyboard interface
after a set length of time. For example, if the scanner is configured for Serial Emu-
lation Mode, but the host system does not have the correct driver, the scanner
would fail. If you set the HID Fallback Mode for a set length of time, for example, 5
minutes, the scanner would change to a HID keyboard interface after 5 minutes of
trying to configure as serial emulation.
A unique beep sequence indicates that this mode has been entered. While in HID
Fallback Mode, the scanner will not scan normal bar codes and sounds a unique
beep sequence that indicates the scanner is in Fallback Mode. Menu codes can
still be scanned while in HID Fallback Mode, allowing you to change the scanner's
programming.
Voyager 1250g User Guide
USB Japanese Keyboard (PC)
USB HID Bar Code Scanner
USB Keyboard (Mac)
11