Msi Message Length; Plessey Code; Plessey Check Character - Honeywell Voyager 1250g User Manual

MSI Message Length

Scan the bar codes below to change the message length. Refer to
Description
= 1-80. Minimum Default = 3, Maximum Default = 80.
Minimum Message Length

Plessey Code

Plessey Code On/Off

Plessey Check Character

No Check Character indicates that the scanner reads and transmits bar code data
with or without a check character.
When Check Character is set to Validate, but Don't Transmit, the unit only reads
Plessey bar codes printed with a check character, but will not transmit the check
character with the scanned data.
138
(page 88) for additional information. Minimum and Maximum lengths
< Default All Plessey Code Settings >
On
Message Length
Maximum Message Length
* Off
Voyager 1250g User Guide