Chapter 6 - Symbologies; All Symbologies Off; Message Length Description; Codabar - Honeywell Voyager 1250g User Manual

All Symbologies Off

For best scanner performance, we recommend you only enable the symbologies
that you need. Scan All Symbologies Off to disable all symbologies, then enable
the symbologies you need by scanning the On bar code for each symbology.

Message Length Description

You are able to set the valid reading length of some of the bar code symbologies.
You may wish to set the same value for minimum and maximum length to force the
scanner to read fixed length bar code data. This helps reduce the chances of a mis-
read.
Example: Decode only those bar codes with a count of 9-20 characters.
Min. length = 09
Max. length = 20
Example: Decode only those bar codes with a count of 15 characters.
Min. length = 15
Max. length = 15
For a value other than the minimum and maximum message length defaults, scan
the bar codes included in the explanation of the symbology, then scan the digit
value of the message length and
page 202. The minimum and maximum lengths and the defaults are included with
the respective symbologies.

Codabar

Codabar On/Off
88
<Default All Codabar Settings>
* On
All Symbologies Off
Save bar codes on the Programming Chart
Voyager 1250g User Guide
on