Check Digits Required; Check Digit Validation; Code 11 Redundancy - Honeywell Voyager 1250g User Manual

Check Digits Required

These options set whether 1 or 2 check digits are required with Code 11 bar codes.
Auto Select Check Digits determines the number of check digits based on the
length of the bar code. If the bar code is 10 digits or more, 2 check digits are
required. If it is 9 digits or less, 1 check digit is required. The check digit data is only
transmitted if you program that feature (see
Default = Two Check Digits Required.

Check Digit Validation

When Check Character is set to Validate and Transmit, the scanner will only read
Code 11 bar codes printed with the specified type check character(s), and will
transmit the character(s) at the end of the scanned data.
Validate and Transmit Auto

Code 11 Redundancy

If you are encountering errors when reading Code 11 bar codes, you may want to
adjust the redundancy count. Redundancy adjusts the number of times a bar code
is decoded before transmission, which may reduce the number of errors. Note that
the higher the redundancy count, the longer it will take to decode the bar code. To
104
One Check Digit Required
Auto Select Check Digits
Required
Validate and Transmit One
Check Digit
Select Check Digits
Check Digit Validation
* Two Check Digits Required
Validate and Transmit Two
Voyager 1250g User Guide
on page 104).
Check Digits