Matrix 2 of 5
Matrix 2 of 5 On/Off
Matrix 2 of 5 Check Character
No Check Character indicates that the scanner reads and transmits bar code data
with or without a check character.
When Check Character is set to Validate, but Don't Transmit, the unit only reads
Matrix 2 of 5 bar codes printed with a check character, but will not transmit the
check character with the scanned data.
When Check Character is set to Validate and Transmit, the scanner only reads
Matrix 2 of 5 bar codes printed with a check character, and will transmit this char-
acter at the end of the scanned data. Default = No Check Character.
Matrix 2 of 5 Redundancy
If you are encountering errors when reading Matrix 2 of 5 bar codes, you may want
to adjust the redundancy count. Redundancy adjusts the number of times a bar
code is decoded before transmission, which may reduce the number of errors. Note
102
On
* No Check Character
Validate and Transmit
<Default All Matrix 2 of 5 Settings>
* Off
Validate, but Don't Transmit
Voyager 1250g User Guide