Content Verification; Transmit Identifiers; Flag Digit Conversion - Honeywell Voyager 1250g User Manual

Content Verification

When the On bar code is scanned, the check character values are output along
with the bar code data, thus allowing you to verify that the check character is in
agreement with that calculated for the data stream. Default = Off.

Transmit Identifiers

You may disable the transmission of the ISBT Code 128 data identifiers by scan-
ning Off. When this selection is Off, the first 2 data (ID) characters are removed
from the data stream unless the ISBT code contains the Donation Identification
Number identifiers. If the code contains the Donation Identification Number iden-
tifiers, only the first ID character is removed from the Donation Identification Num-
ber. The second character is transmitted as normal data. Default = On.

Flag Digit Conversion

Type 3 flag digits are a part of the Donation Identification Number in an ISBT 128
bar code. If you select On, the flag data is converted into a single MOD (37, 2) char-
acter and transmitted with the bar code data. Scan Off if you do not want the flag
digits transmitted. Default = Off.
Voyager 1250g User Guide
On
* On
On
* Off
Off
* Off
111