Msi; Msi Check Character - Honeywell Voyager 1250g User Manual

To adjust the redundancy, scan the EAN/JAN-8 Redundancy bar code below, then
scan a redundancy count between 0 and 10 on the
202. Then scan the

MSI

MSI On/Off

MSI Check Character

Different types of check characters are used with MSI bar codes. You can program
the scanner to read MSI bar codes with Type 10 check characters.
Default = Validate Type 10, but Don't Transmit.
When Check Character is set to Validate Type 10/11 and Transmit, the scanner
will only read MSI bar codes printed with the specified type check character(s), and
will transmit the character(s) at the end of the scanned data.
When Check Character is set to Validate Type 10/11, but Don't Transmit, the unit
will only read MSI bar codes printed with the specified type check character(s), but
will not transmit the check character(s) with the scanned data.
* Validate Type 10, but Don't
136
Save bar code. Default = 0.
On
Transmit
EAN/JAN-8 Redundancy
<Default All MSI Settings>
Programming Chart
* Off
Voyager 1250g User Guide
on page