Honeywell 1900GSR-2 Quick Start Manual

Honeywell 1900GSR-2 Quick Start Manual

Corded imaging scanner
Hide thumbs Also See for 1900GSR-2:


Youjie HH660
Corded Imaging Scanner
Quick Start Guide
Rev C


Table of Contents

Summary of Contents for Honeywell 1900GSR-2

  • Page 1 Youjie HH660 Corded Imaging Scanner Quick Start Guide Rev C 6/16...
  • Page 2: Getting Started

    Note: Refer to your User’s Guide for information about cleaning your device. Getting Started Turn off computer’s power before connecting the scanner, then power up the computer once the scanner is fully connected. Power Supply Assembly (if included)
  • Page 3 Connecting the Scanner USB:...
  • Page 4: Rs232 Serial Port

    RS232 Serial Port:...
  • Page 5: Keyboard Wedge

    Keyboard Wedge:...
  • Page 6: Reading Techniques

    Reading Techniques The view finder projects an aiming beam that should be centered over the bar code, but it can be positioned in any direction for a good read. Hold the scanner over the bar code, press the button, and center the aiming beam on the bar code.
  • Page 7: Usb Serial

    Scan the following code to program the scanner to emulate a regular RS232-based COM Port. If you are using a Microsoft® Windows® PC, you will need to download a driver from the Honeywell website ( The driver will use the next available COM Port number.
  • Page 8 France Germany/Austria Great Britain Italy Norway Spain Switzerland (Default) By default, national character replacements are used for the follow- ing characters: #$@[\]^‘{|}~ Refer to the ISO 646 Character Replacements chart in your User’s Guide to view the character replacements for each country. Note: For a complete list of country codes, see the User’s Guide for your product at our website,
  • Page 9: Turbo Mode

    Turbo Mode This selection is a keyboard modifier, so it may only be used when your interface is USB Keyboard or Keyboard Wedge. The scanner sends characters to a terminal faster using Turbo Mode. If the termi- nal drops characters, do not use Turbo Mode. Turbo Mode On Turbo Mode Off Trigger...
  • Page 10: Add Code Id Prefix To All Symbologies

    Suffix If you want a carriage return after the bar code, scan the Add CR Suffix bar code. To add a tab after the bar code, scan the Add Tab Suffix bar code. Otherwise, scan the Remove Suffix bar code to remove the suffixes.
  • Page 11: Function Code Transmit

    Function Code Transmit When this selection is enabled and function codes are contained within the scanned data, the scanner transmits the function code to the terminal. Charts of these function codes are provided in your User’s Guide. When the scanner is in keyboard wedge mode, the scan code is converted to a key code before it is transmitted.
  • Page 12: Data Format Editor Instructions

    Data Format Editor Instructions The following are abbreviated instructions for entering a data format. For complete instructions refer to your User’s Guide, available at our website, 1. Scan the Enter Data Format symbol. 2. Primary/Alternate Format: scan 0 for Primary Format 3.
  • Page 13: Programming Chart

    Programming Chart...
  • Page 14 Save...
  • Page 15 For localized versions of this document, and to download the User’s Guide, go to Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made.
  • Page 16 This document contains proprietary information that is protected by copy- right. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written con- sent of HII. 2015-2016 Honeywell International Inc. All rights reserved. Web Address: 产品中有害物质的名称及含量...

This manual is also suitable for:

Youjie hh660

Table of Contents