Msi Redundancy - Honeywell Voyager 1250g User Manual

Validate 2 Type 10 Characters,
Validate Type 11 then Type 10
Character, but Don't Transmit
Disable MSI Check Characters

MSI Redundancy

If you are encountering errors when reading MSI bar codes, you may want to adjust
the redundancy count. Redundancy adjusts the number of times a bar code is
decoded before transmission, which may reduce the number of errors. Note that
the higher the redundancy count, the longer it will take to decode the bar code. To
adjust the redundancy, scan the MSI Redundancy bar code below, then scan a
redundancy count between 0 and 10 on the
Then scan the
Voyager 1250g User Guide
but Don't Transmit
Save bar code. Default = 0.
Programming Chart
MSI Redundancy
Validate Type 10 and Transmit
Validate 2 Type 10 Characters
and Transmit
Validate Type 11 then
Type 10 Character and Transmit
on page 202.
137