Coupon Gs1 Databar Output; Upc-E0 - Honeywell Voyager 147 Series User Manual

Coupon GS1 DataBar Output

If you scan coupons that have both UPC and GS1 DataBar codes, you may wish to
scan and output only the data from the GS1 DataBar code. Scan the GS1 Output
On code below to scan and output only the GS1 DataBar code data. Default = GS1
Output Off.

UPC-E0

UPC-E0 On/Off
Most U.P.C. barcodes lead with the 0 number system. To read these codes, use the
UPC-E0 On selection. If you need to read codes that lead with the 1 number sys-
tem, use
UPC-E0 Expand
UPC-E Expand expands the UPC-E code to the 12 digit, UPC-A format. Default =
Off.
Voyager XP User Guide
* GS1 Output Off
UPC-E1 (page 137). Default = On.
* UPC-E0 On
On
<Default All UPC-E Settings>
GS1 Output On
UPC-E0 Off
135