Coupon Gs1 Databar Output; Upc-E0 - Honeywell HF680 Series User Manual

Coupon GS1 DataBar Output

If you scan coupons that have both UPC and GS1 Databarcodes, you may wish to
scan and output only the data from the GS1 Databarcode. Scan the GS1 Output
On code below to scan and output only the GS1 Databarcode data. Default = GS1
Output Off.

UPC-E0

UPC-E0 On/Off
Most U.P.C. barcodes lead with the 0 number system. To read these codes, use the
UPC-E0 On selection. If you need to read codes that lead with the 1 number
system, use
UPC-E0 Expand
UPC-E Expand expands the UPC-E code to the 12 digit, UPC-A format. Default =
Off.
HF680 Series User Guide
* GS1 Output Off
UPC-E1 (page 91). Default = On.
* UPC-E0 On
On
<Default All UPC-E Settings>
GS1 Output On
UPC-E0 Off
89