Object Detection Distance; Character Activation Mode - Honeywell Voyager 1250g User Manual

Object Detection Distance

When the scanner is in the stand and you are using Object Detection Mode, you
can set the distance range for detecting objects. Short sets the scanner to detect
objects approximately 5 inches (12.7cm) away from the nose. Long sets it to detect
objects approximately 10 inches (25.4cm) away. Default = Short In-Stand, Long
Out-of-Stand.

Character Activation Mode

You may use a character sent from the host to trigger the scanner to begin scan-
ning. When the activation character is received, the scanner continues scanning
until either the
deactivation character is received (see
code is transmitted. Scan the On bar code below to use character activation, then
use Activation Character (following) to select the character you will send from the
host to start scanning. Default = Off.
52
* Short
In-Stand
Short
Out-of-Stand
Character Activation Laser Timeout
* Off
(page 3-53) is reached, the
Deactivation Character
Voyager 1250g User Guide
Object Detection Laser
Timeout Out-of-Stand
Long
In-Stand
* Long
Out-of-Stand
on page 54), or a bar