CHAPTER
7
UTILITIES
Add a Test Code I.D. Prefix to All Symbologies
This selection allows you to turn on transmission of a Code I.D. before the decoded
symbology. (See the
character code that identifies each symbology.) This action first clears all current
prefixes, then programs a Code I.D. prefix for all symbologies. This is a temporary
setting that will be removed when the unit is power cycled.
Show Software Revision
Scan the bar code below to output the current software revision, unit serial number,
and other product information for both the scanner and base.
Show Data Format
Scan the bar code below to show current data format settings.
Voyager 1250g User Guide
Symbology Charts,
beginning on page 189) for the single
Add Code I.D. Prefix to
All Symbologies (Temporary)
Show Revision
DFMBK3?.
Data Format Settings
147