config stp mst_ports
Restrictions
Example usage:
To designate ports 1 through 5 on module one, with instance ID 2, to have an auto internalCost and a priority of 16:
DGS-3212SR:4#config stp mst_config_id ports 1:1-1:5 instance_id
2 internalCost auto priority 16
Command : config stp mst_config_id ports 1:1-1:5 instance_id 2
internalCost auto priority 16
Success.
DGS-3212SR:4#
show stp
Purpose
Syntax
Description
Parameters
Restrictions
DGS-3212SR Layer 3 Gigabit Switch
are two options:
auto
internalCost will set quickest route automatically and
optimally for an interface. The default value is derived from
the media speed of the interface.
value 1-2000000 – Selecting this parameter with
a value in the range of 1-2000000 will set the quickest route
when a loop occurs. A lower internalCost represents a
quicker transmission.
priority <value 0-240> - Enter a value between 0 and 240 to set
the priority for the port interface. A higher priority will designate the
interface to forward packets first. A lower number denotes a
higher priority.
Only administrator-level users can issue this command.
Used to display the Switch's current STP configuration.
show stp
This command displays the Switch's current STP configuration.
None.
None.
87
–
Selecting
this
parameter
for
the