D-Link DGS-3212SR Command Line Interface Reference Manual page 90

disable stp
Restrictions
Example usage:
To disable STP on the Switch:
DGS-3212SR:4#disable stp
Command: disable stp
Success.
DGS-3212SR:4#
config stp version
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To set the Switch globally for the Multiple Spanning Tree Protocol (MSTP):
DGS-3212SR:4#config stp version mstp
Command: config stp version mstp
Success.
DGS-3212SR:4#
config stp
Purpose
DGS-3212SR Layer 3 Gigabit Switch
Only administrator-level users can issue this command.
Used to globally set the version of STP on the Switch.
config stp version [mstp | rstp | stp]
This command allows the user to choose the version of the
spanning tree to be implemented on the Switch.
mstp – Selecting this parameter will set the Multiple Spanning
Tree Protocol (MSTP) globally on the Switch.
rstp - Selecting this parameter will set the Rapid Spanning Tree
Protocol (RSTP) globally on the Switch.
stp - Selecting this parameter will set the Spanning Tree Protocol
(STP) globally on the Switch.
Only administrator-level users can issue this command.
Used to setup STP, RSTP and MSTP on the Switch.
78