D-Link DGS-3212SR Command Line Interface Reference Manual page 242

DGS-3212SR:4#
Example usage:
To view SIM neighbors:
DGS-3212SR:4#show sim neighbor
Command: show sim neighbor
Neighbor Info Table
Port MAC Address
------ ------------------------- ---------
23 00-35-26-00-11-99 Commander
23 00-35-26-00-11-91 Member
24 00-35-26-00-11-90 Candidate
Total Entries: 3
DGS-3212SR:4#
reconfig
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To connect to the MS, with member id 2, through the CS, using the command line interface:
DGS-3212SR:4#reconfig member_id 2
Command: reconfig member_id 2
DGS-3212SR:4#
Login:
DGS-3212SR Layer 3 Gigabit Switch
Role
Used to connect to a member switch, through the commander switch
using telnet.
reconfig {member_id <value 1-32 | exit}
This command is used to reconnect to a member switch using telnet.
member_id <value 1-32> - Select the id number of the member
switch the user desires to configure.
exit – This command is used to exit from managing the member
switch and will return to managing the commander switch.
Only administrator-level users can issue this command.
230