D-Link DGS-3212SR Command Line Interface Reference Manual page 174

config authen_enable
Restrictions
Example usage:
To configure the user defined method list "Permit" with authentication methods tacacs, xtacacs and local, in that order.
DGS-3212SR:4#config authen_enable method_list_name Trinity method
tacacs xtacacs local
Command: config authen_enable method_list_name Trinity method tacacs
xtacacs local
Success.
DGS-3212SR:4#
Example usage:
To configure the default method list with authentication methods xtacacs, tacacs+ and local, in that order:
DGS-3212SR:4#config authen_enable default method xtacacs tacacs+ local
Command: config authen_enable default method xtacacs tacacs+ local
Success.
DGS-3212SR:4#
delete authen_enable method_list_name
Purpose
Syntax
Description
Parameters
DGS-3212SR Layer 3 Gigabit Switch
local_enable - Adding this parameter will require the user to
be authenticated using the local user account database on
the switch. The local enable password of the device can be
configured using the "config admin local_password"
command.
none – Adding this parameter will require no authentication
to access the administration level privileges on the switch.
Only administrator-level users can issue this command.
Used to delete a user-defined method list of authentication methods
for promoting normal user level privileges to Administrator level
privileges on the switch.
delete authen_enable method_list_name <string 15>
This command is used to delete a user-defined method list of
authentication methods for promoting user level privileges to
Administrator level privileges.
<string 15> Enter an alphanumeric string of up to 15 characters to
define the given enable method list the user wishes to delete
162