D-Link DGS-3212SR Command Line Interface Reference Manual page 48

DGS-3212SR:4#
delete snmp user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a previously entered SNMP user on the switch:
DGS-3212SR:4#delete snmp user dlink
Command: delete snmp user dlink
Success.
DGS-3212SR:4#
show snmp user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the SNMP users currently configured on the switch:
DGS-3212SR:4#show snmp user
Command: show snmp user
Username
---------------
DGS-3212SR Layer 3 Gigabit Switch
Used to remove an SNMP user from an SNMP group and also to
delete the associated SNMP group.
delete snmp user <username 32>
The delete snmp user command removes an SNMP user from
its SNMP group and then deletes the associated SNMP group.
<username 32> − An alphanumeric string of up to 32 characters
that identifies the SNMP user that will be deleted.
Only administrator-level users can issue this command.
Used to display information about each SNMP username in the
SNMP group username table.
show snmp user
The show snmp user command displays information about each
SNMP username in the SNMP group username table.
None.
Only administrator-level users can issue this command.
Group Name SNMP Version Auth-Protocol PrivProtocol
-------------- ------------ -------------------- ------------------
36