D-Link DGS-3212SR Command Line Interface Reference Manual page 56

DGS-3212SR:4#
delete snmp group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the SNMP group named "sg1".
DGS-3212SR:4#delete snmp group sg1
Command: delete snmp group sg1
Success.
DGS-3212SR:4#
show snmp groups
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the currently configured SNMP groups on the switch:
DGS-3212SR:4#show snmp groups
Command: show snmp groups
Vacm Access Table Settings
DGS-3212SR Layer 3 Gigabit Switch
Used to remove an SNMP group from the switch.
delete snmp group <groupname 32>
The delete snmp group command is used to remove an SNMP
group from the switch.
<groupname 32> − An alphanumeric name of up to 32 characters
that will identify the SNMP group to be deleted.
Only administrator-level users can issue this command.
Used to display the group-names of SNMP groups currently
configured on the switch. The security model, level, and status of
each group are also displayed.
show snmp groups
The show snmp groups command displays the group-names of
SNMP groups currently configured on the switch. The security
model, level, and status of each group are also displayed.
None.
Only administrator-level users can issue this command.
44