D-Link DGS-3212SR Command Line Interface Reference Manual page 69

To download a configuration file:
DGS-3212SR:4#download configuration 10.48.74.121 c:\cfg\setting.txt
Command: download configuration 10.48.74.121 c:\cfg\setting.txt
Connecting to server................... Done.
Download configuration............. Done.
DGS-3212SR:4#
upload
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To upload a configuration file:
DGS-3212SR:4#upload configuration 10.48.74.121 c:\cfg\log.txt
Command: upload configuration 10.48.74.121 c:\cfg\log.txt
Connecting to server................... Done.
Upload configuration...................Done.
DGS-3212SR:4#
ping
Purpose
DGS-3212SR Layer 3 Gigabit Switch
Used to upload the current switch settings or the switch history log
to a TFTP server.
upload [ configuration | log ] <ipaddr> <path_filename 64> ]
This command is used to upload either the switch's current
settings or the switch's history log to a TFTP server.
configuration − Specifies that the switch's current settings will be
uploaded to the TFTP server.
log − Specifies that the switch's current log will be uploaded to the
TFTP server.
<ipaddr> − The IP address of the TFTP server. The TFTP server
must be on the same IP subnet as the switch.
<path_filename 64> − Specifies the location of the switch
configuration file on the TFTP server. This file will be replaced by
the uploaded file from the switch.
The TFTP server must be on the same IP subnet as the switch.
Only administrator-level users can issue this command.
Used to test the connectivity between network devices.
57