DGS-3212SR:4#show snmp traps
Command: show snmp traps
SNMP Traps
Authenticate Trap : Enabled
DGS-3212SR:4#
disable snmp traps
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To prevent SNMP traps from being sent from the Switch:
DGS-3212SR:4#disable snmp traps
Command: disable snmp traps
Success.
DGS-3212SR:4#
DGS-3212SR Layer 3 Gigabit Switch
: Enabled
Used to disable SNMP trap support on the switch.
disable snmp traps
This command is used to disable SNMP trap support on the
Switch.
None.
Only administrator-level users can issue this command.
51