D-Link DGS-3212SR Command Line Interface Reference Manual page 66
12-port gigabit layer 2 stackable switch
Hide thumbs
Also See for DGS-3212SR:
- Command line interface reference manual (209 pages) ,
- User manual (140 pages)
Table of Contents
Advertisement
To configure the switch name for "
DGS-3212SR:4#config snmp system_name DGS-3212SR Stackable Switch
Command: config snmp system_name DGS-3212SR Stackable Switch
Success.
DGS-3212SR:4#
enable rmon
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To enable RMON:
DGS-3212SR:4#enable rmon
Command: enable rmon
Success.
DGS-3212SR:4#
disable rmon
Purpose
Syntax
Description
Parameters
Restrictions
DGS-3212SR Layer 3 Gigabit Switch
DGS-3212SR Stackable Switch
Used to enable RMON on the switch.
enable rmon
This command is used, in conjunction with the disable rmon
command below, to enable and disable remote monitoring
(RMON) on the switch.
None.
Only administrator-level users can issue this command.
Used to disable RMON on the switch.
disable rmon
This command is used, in conjunction with the enable rmon
command above, to enable and disable remote monitoring
(RMON) on the switch.
None.
Only administrator-level users can issue this command.
54
":
Advertisement
Table of Contents
