D-Link DGS-3212SR Command Line Interface Reference Manual page 181

Success.
DGS-3212SR:4#
delete authen server_host
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a user-defined TACACS+ authentication server host:
DGS-3212SR:4#delete authen server_host 10.1.1.121 protocol tacacs+
Command: delete authen server_host 10.1.1.121 protocol tacacs+
Success.
DGS-3212SR:4#
show authen server_host
Purpose
Syntax
DGS-3212SR Layer 3 Gigabit Switch
Used to delete a user-defined authentication server host.
delete authen server_host <ipaddr> protocol [tacacs | xtacacs |
tacacs+]
This command is used to delete a user-defined authentication
server host previously created on the switch.
server_host <ipaddr> - The IP address of the remote server host
the user wishes to delete.
protocol – The protocol used by the server host the user wishes to
delete. The user may choose one of the following:
tacacs – Enter this parameter if the server host utilizes the
TACACS protocol.
xtacacs - Enter this parameter if the server host utilizes the
XTACACS protocol.
tacacs+ - Enter this parameter if the server host utilizes
the TACACS+ protocol.
radius - Enter this parameter if the server host utilizes the
RADIUS protocol.
Only administrator-level users can issue this command.
Used to view a user-defined authentication server host.
show authen server_host
169