D-Link DGS-3212SR Command Line Interface Reference Manual page 34

save
Syntax
Description
Parameters
Restrictions
Example usage:
To save the switch's current configuration to non-volatile RAM:
DGS-3212SR:4#save
Command: save
Saving all configurations to NV-RAM... Done
DGS-3212SR:4#
reboot
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To restart the switch:
DGS-3212SR:4#reboot
Command: reboot
Are you sure want to proceed with the system reboot? (y/n)
Please wait, the switch is rebooting...
Reset
Purpose
Syntax
DGS-3212SR Layer 3 Gigabit Switch
save
This command is used to enter the current switch configuration into
non-volatile RAM. The saved switch configuration will be loaded into
the switch's memory each time the switch is restarted.
Entering just the save command will save the switch configuration to
NV-Ram
Only administrator-level users can issue this command.
Used to restart the switch.
reboot
This command is used to restart the switch.
None.
Only administrator-level users can issue this command.
Used to reset the switch to the factory default settings.
reset {[config | system]}
22