D-Link DGS-3212SR Command Line Interface Reference Manual page 32

enable telnet
Restrictions
Example usage:
To enable Telnet and configure port number:
disable telnet
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the Telnet protocol on the switch:
enable web
Purpose
Syntax
Description
DGS-3212SR Layer 3 Gigabit Switch
TCP port for the Telnet protocol is 23.
Only administrator-level users can issue this command.
DGS-3212SR:4#enable telnet 23
Command: enable telnet 23
Success.
DGS-3212SR:4#
Used to disable the Telnet protocol on the switch.
disable telnet
This command is used to disable the Telnet protocol on the
switch.
None.
Only administrator-level users can issue this command.
DGS-3212SR:4#disable telnet
Command: disable telnet
Success.
DGS-3212SR:4#
Used to enable the HTTP-based management software on the
switch.
enable web <tcp_port_number 1-65535>
This command is used to enable the Web-based management
software on the switch. The user can specify the TCP port
20