D-Link DGS-3212SR Command Line Interface Reference Manual page 118

Command
bandwidth_control
config 802.1p
user_priority
show 802.1p
user_priority
config 802.1p
default_priority
show 802.1p
default_priority
config
scheduling_mechanism
show
scheduling_mechanism
Each command is listed, in detail, in the following sections.
config bandwidth_control
Purpose
Syntax
Description
Parameters
DGS-3212SR Layer 3 Gigabit Switch
Parameters
{<priority 0-7> <class_id 0-7>}
[<portlist> | all] | <priority 0-7>
{<portlist>}
[strict | round_robin]
Used to configure bandwidth control on a by-port basis.
config bandwidth_control <portlist>{rx_rate [ no_limit |
<value 1-1000>] | tx_rate [ no_limit | <value 1-1000>]}
The config bandwidth_control command is used to configure
bandwidth on a by-port basis.
<portlist> − Specifies a range of ports to be configured. The port
list is specified by listing the lowest switch number and the
beginning port number on that switch, separated by a colon.
Then the highest switch number, and the highest port number of
the range (also separated by a colon) are specified. The
beginning and end of the port list range are separated by a dash.
For example, 1:3 specifies switch number 1, port 3. 2:4 specifies
switch number 2, port 4. 1:3-2:4 specifies all of the ports between
switch 1, port 3 and switch 2, port 4 − in numerical order.
rx_rate − Specifies that one of the parameters below (no_limit or
<value 1-1000>) will be applied to the rate at which the above
specified ports will be allowed to receive packets
no_limit − Specifies that there will be no limit on the rate
of packets received by the above specified ports.
<value 1-1000> − Specifies the packet limit, in Mbps, that
the above ports will be allowed to receive.
tx_rate − Specifies that one of the parameters below (no_limit or
<value 1-1000>) will be applied to the rate at which the above
specified ports will be allowed to transmit packets.
no_limit − Specifies that there will be no limit on the rate
of packets received by the above specified ports.
106