D-Link DGS-3212SR Command Line Interface Reference Manual page 78

Example usage:
To display the current status of the syslog function:
DGS-3212SR:4#show syslog
Command: show syslog
Syslog Global State: Enabled
DGS-3212SR:4#
create syslog host
Purpose
Syntax
Description
DGS-3212SR Layer 3 Gigabit Switch
Used to create a new syslog host.
create syslog host <index 1-4> ipaddress <ipaddr> {severity
[informational |warning|all] | facility [local0|local1|local2
|local3|local4|local5|local6|local7] | udp_port
<udp_port_number> | state [enable|disable]}
The create syslog host command is used to create a new syslog
host.
66