D-Link DGS-3212SR Command Line Interface Reference Manual page 250

enable sntp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the SNTP function:
DGS-3212SR:4#enable sntp
Command: enable sntp
Success.
DGS-3212SR:4#
disable sntp
Purpose
Syntax
Description
Parameters
Restrictions
Example:
To stop SNTP support:
DGS-3212SR:4#disable sntp
Command: disable sntp
Success.
DGS-3212SR:4#
DGS-3212SR Layer 3 Gigabit Switch
Enables SNTP server support.
enable sntp
This will enable SNTP support. SNTP service must be separately
configured (see config sntp).Enabling and configuring SNTP
support will override any manually configured system time
settings.
None.
Only administrator-level users can issue this command. SNTP
settings must be configured for SNTP to function (config sntp).
Disables SNTP server support.
disable sntp
This will disable SNTP support. SNTP service must be separately
configured (see config sntp).
None.
Only administrator-level users can issue this command.
238